LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> GLS63 AMG >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Hydraulic & Mechanical System - 166 Chassis 1 Of 2 >> Testing & Repair >> Remove/Install Mechanical Stop Lamp Switch - AR42.10-P-0040EW

Remove/Install Mechanical Stop Lamp Switch - AR42.10-P-0040EW

Model 166, 172, 190, 197, 201, 204, 207, 212, 217, 218, 221, 231, 292 

Model 205 (except 205.012/013/047/053/054/147/212/213/247/253) 

except code B01 (48V technology) 

Model 213 (except 213.016/050/053/054/153/155/216/253) 

except code B01 (48V technology) 

Model 222 (except 222.004/057/104/157/163) 

except code B01 (48V technology) 

Model 253 (except 253.311/353/354/911/953/954) 

except code B01 (48V technology) 

Fig 1: Mechanical Stop/Brake Lamp Switch Components Location - Model 166
G14138760REMOVINGINSTALLINGCourtesy of MERCEDES-BENZ USA
  Notes on safety-relevant components   AH00.00-Z-0019-01A
REMOVING Remove     
1 Remove cover below instrument panel on driver's side. Model 221.0/1 AR68.10-P-1500SX
    Model 166, 292 AR68.10-P-1500GQ
    Model 217
Model 222.0 (except 222.004/057), 222.1 (except 222.104/157/163), 222.9
except code B01 (48V technology)
AR68.10-P-1500LF
    Model 231 AR68.10-P-1500RK
    Model 205 (except 205.012/013/047/053/054/147/212/213/247/253)
except code B01 (48V technology)
Model 253 (except 253.311/353/354/911/953/954)
except code B01 (48V technology)
AR68.10-P-1500LW
    Model 213 (except 213.016/050/053/054/153/155/216/253)
except code B01 (48V technology)
AR68.10-P-1501LWE
    Model 190, 197 AR68.10-P-1501RQ
2 Disconnect electrical connector from brake light switch (4).    
3 Remove cover (1).    
4 Pull out brake light switch (4).    
5 Squeeze catches (arrows) together and detach bracket (2).    
INSTALLING Install     
6 Fully depress brake pedal (3) and insert brake light switch (4) with bracket (2).    
7 Fully depress brake light switch (4).    
8 Release brake pedal (3) and pull back.    
9 Install cover (1).    
10 Connect electrical connector to brake light switch (4).    
11 Install cover below instrument panel on driver's side. Model 221.0/1 AR68.10-P-1500SX
    Model 166, 292 AR68.10-P-1500GQ
    Model 217
Model 222.0 (except 222.004/057), 222.1 (except 222.104/157/163), 222.9
except code B01 (48V technology)
AR68.10-P-1500LF
    Model 231 AR68.10-P-1500RK
    Model 205 (except 205.012/013/047/053/054/147/212/213/247/253)
except code B01 (48V technology)
Model 253 (except 253.311/353/354/911/953/954)
except code B01 (48V technology)
AR68.10-P-1500LW
    Model 213 (except 213.016/050/053/054/153/155/216/253)
except code B01 (48V technology)
AR68.10-P-1501LWE
    Model 190, 197 AR68.10-P-1501RQ