Remove Wheel Well - Ar62.20-P-1200-21GQ

Model 166, 292 

Courtesy of MERCEDES-BENZ USA

Shown on model 166.0 

1. Coarsely cut front wheel well (1) at separation point (area A).
2. Remove section from front wheel well (1).

   Courtesy of MERCEDES-BENZ USA

   Shown on model 166.0 

3. Expose spot welds on front wheel (1) and drill with 0 6.7 mm bit (area B).
4. Expose spot welds on front wheel well (1) and drill with 0 6.7 mm bit (areas C2 and F).
5. Expose spot welds on front wheel well (1) and cut out (areas Ci, D, E and G).
6. Remove damaged front wheel well (1).

   Shown on model 166.0 

   Courtesy of MERCEDES-BENZ USA

7. Grind mating surfaces on body down to bare metal in cross-hatched areas.
8. Remove shavings and drill chips.
9. Coat insides of spot welding flanges with zinc dust paint.

   Shown on model 166.0 

   Courtesy of MERCEDES-BENZ USA