Processing Of Body Sealant (PAINTABLE) Before Painting - Ar97.10-P-0500-02GZ
Model 164, 166, 251, 292
REPAIR MATERIALS
| Number |
Designation |
Order number |
| BR00.45-Z-1003-01A |
White sealing compound, 310 ml, DBL 6069.20 |
A 001 989 63 20 |
| BR00.45-Z-1041-01A |
Seam sealant, sprayable 310 ml |
A 002 989 84 20 |
When replacing sheet metal attachment parts (doors, hinged rear doors, etc.) as well as body parts welded in, carefully seal folds and openings with body sealant in order to avoid corrosion and leaks. Seal welds, rivets and flanges on both sides. Observe following procedure.
- Thoroughly clean affected parts.
- Apply sealant uniformly.
- Spread body sealant evenly.
The brushes, wooden spatulas, etc. used to spread the body sealant should generally be cleaned only with pure benzine. If these objects are cleaned with paint thinner or other alcoholic liquids before applying the body sealant, the sealant does not cure and remains sticky.
- Maintain drying time (over paintable).