Remove/Install Front Axle Brake Caliper - AR42.10-P-0070GZ
Model 164, 166, 292
Shown on model 164.175
Shown on model 166.074
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on installing brake wear indicator contact sensors | Model 164 | AH42.10-P-0003-01GZ | |
| Notes on installing brake wear indicator contact sensors | Model 166, 292 | AH42.10-P-0003-01CW | |
| Remove/install | |||
| 1 | Detach corresponding complete wheel | Model 292 | AR40.10-P-1100GQC |
| Model 164 | AP40.10-P-4050Z | ||
| Model 166 | AP40.10-P-4050EW | ||
| 2.1 | Unscrew bolt (2) | Model 164, 166 (except 166.074/874), 292 (except 292.374/375) On vehicles with brake wear sensor. |
|
| *BA42.10-P-1004-10L | |||
| 2.2 | Remove bolt (31e) | Model 166.074/874, 292.374/375 | |
| *BA42.10-P-1004-10L | |||
| 3 | Remove brake linings | Model 164 | AR42.10-P-0160GZ |
| Model 166.074/874, 292.374/375 | AR42.10-P-1610GQA | ||
| Model 166 (except 166.074/874), 292 (except 292.374/375) | AR42.10-P-1600GQ | ||
| 4 | Detach brake hose (3) | AR42.10-P-0013GZ | |
| 5 | Seal exposed connections on brake caliper (1, 31a) and brake hose (3) | ||
| Fig 2 | |||
| 6.1 | Unscrew bolts (4) and remove brake caliper support (5) | Model 164, 166 (except 166.074/874), 292 (except 292.374/375) |
|
| *BA42.10-P-1003-10L | |||
| 6.2 | Remove bolts (35) and remove brake caliper (31a) | Model 166.074/874, 292.374/375 |
|
| *BA42.10-P-1003-10L | |||
| 7 | Install in the reverse order | ||
| 8 | Bleed brake system | Model 164 | AR42.10-P-0010GZ |
| Model 166, 292 | AR42.10-P-0010CW | ||
| 9 | Perform brake test | ||
| AP42.00-P-4290BA |
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 164 (except 164.177) | Model 164.177 | ||
|---|---|---|---|---|---|
| BA42.10-P-1003-10L | Self-locking bolt, brake caliper support to steering knuckle | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 45 | 45 | ||
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BA42.10-P-1003-10L | Self-locking bolt, brake caliper support to steering knuckle | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 45 | 45 | ||
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 164 (except 164.177) | Model 164.177 | ||
|---|---|---|---|---|---|
| BA42.10-P-1004-10L | Screw/bolt, brake lining contact sensor to brake caliper | M6 | Nm | 8 | 8 |
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BA42.10-P-1004-10L | Screw/bolt, brake lining contact sensor to brake caliper | M6 | Nm | 8 | 8 |