Remove/Install Fender Liner In Rear Fender - AR88.10-P-1400GQ

Model 166, 292 

Shown on model 166 

Fig 1: Fender Liner In Rear Fender Components Location - Model 166

Courtesy of MERCEDES-BENZ USA

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Remove/install
1	Lift vehicle with vehicle lift		AR00.60-P-1000GZ
2.1	Unscrew nuts (1)	Model 166
2.2	Unscrew the nuts	Model 292
3	Unscrew bolt (2)
4.1	Remove expansion rivets (3)	Model 166
		Clip remover	Fig 3
4.2	Unscrew bolts	Model 292
5	Remove fender liner in rear fender (4) from rear fender	Ensure that fender liner is seated correctly in rear fender (4).
		Long wedge	Fig 2
6	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA