Replace Front Axle Carrier Bearing - AR33.10-P-0040GQ

MODEL 166, 292 

	Remove/install
1	Lower front axle		AR33.10-P-0101GQ
2	Remove bearing from front axle carrier		AR33.10-P-0040-01GZ
		Replacing individual bearings is permissible. Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
		Hollow cylinder	Fig 5
		Hand pump	Fig 4
		Hydraulic hose (complete)	Fig 3
		Extraction and installation tool	Fig 2
		Threaded spindle	Fig 1
3	Install in the reverse order
	Measure
4	Perform wheel alignment check		AR40.20-P-0200GQ
	Check
5	Inspect headlamp adjustment, correct if necessary
		Model 166 as of model year 2016 Model 292	AP82.10-P-8260I
		Model 166 up to model year 2016	AP82.10-P-8260GZA

Fig 1: Identifying Threaded Spindle (652 589 00 33 11)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Extraction And Installation Tool (164 589 01 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Hydraulic Hose - Complete (652 589 00 33 23)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Hand Pump (652 589 00 33 21)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Hollow Cylinder (652 589 00 33 22)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67