Check Air Conditioning System For Leakage - AR83.30-P-1761GQ
MODEL 166.0/8, 292
MODIFICATION NOTES
| 05.10.2016 | Safety note added | AS83.00-Z-0006-01A | |
| 05.10.2016 | Safety note added | AS83.00-Z-0001-02A | |
| 05.10.2016 | Test method changed | Operation step 2, 3 | |
| 13.09.2016 | Gas detection unit added | WS47.00-P-0019B | |
| 13.09.2016 | Leak tester added | WS83.00-P-0035B | |
| 13.09.2016 | Air conditioning service unit R1234yf added | WS83.00-P-0034B | |
| 13.09.2016 | General note added | AH83.30-P-0003-02A | |
| 13.09.2016 | Safety note added | AS83.00-Z-0007-01A |
| Risk of explosion when using a forming gas with incorrect mixing ratio. Risk of suffocation due to inhalation of forming gas. Risk of injury due to bursting of high-pressure hoses. | Wear safety glasses and protective gloves. No smoking or open flames. Work in well-ventilated rooms only. | AS83.00-Z-0001-02A | |
| Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated. Model 166.0/8, 292 except code 2U8 (Alternative refrigerant) |
AS83.00-Z-0006-01A | |
| Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated. Model 166.0/8, 292 with code 2U8 (Alternative refrigerant) |
AS83.00-Z-0007-01A | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| Protect air conditioning circuit and components from moisture when carrying out repair work | AH83.30-P-0005-01A | ||
| Procedure for a damaged or leaky air conditioning system | AH83.30-N-0004-01A | ||
| Notes on handling refrigerant R1234yf | Model 166.0/8, 292 with code 2U8 (Alternative refrigerant) | AH83.30-P-0003-02A | |
| Notes on handling refrigerant R134a | Model 166.0/8, 292 except code 2U8 (Alternative refrigerant) | AH83.30-N-0003-01A | |
| Check | |||
| 1 | Evacuate air conditioning system | AR83.30-P-1760CW | |
| 2 |
Charge the high- and low-pressure sides of the air conditioning system with forming gas when the engine is cold to a system pressure of 15 bar 000 588 19 21 00 leak tester |
Ensure that the ambient conditions are identical. |
WS83.00-P-0035B |
| 3 | Check refrigerant circuit of air conditioning system for leaks using gas detection unit | If a pressure drop is determined. If a leak is detected in the refrigerant circuit ↓ Drain forming gas and replace damaged refrigerant circuit components. |
WS47.00-P-0019B |
| 000 588 03 21 00 Gas detector | If no leak is detected in the refrigerant circuit ↓ Drain the forming gas and check evaporator for leaktightness, replace if necessary. |
AR83.30-P-5550Q | |
| Filling | |||
| 4 | Evacuate the air conditioning system, refill it, and then check the system to make sure that it functions correctly and does not leak | AR83.30-P-1760CW |