LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> GLE63 AMG >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication, Engine Oil Cooling - 166 Chassis >> Maintenance >> Check Engine Oil Level Using On-Board Oil Dipstick - AP18.00-P-1811MP

Check Engine Oil Level Using On-Board Oil Dipstick - AP18.00-P-1811MP

ENGINE 111, 112, 113, 133, 152, 156, 157, 177, 178, 266, 270, 271, 272, 273, 274, 276.8/9, 278, 279, 607, 611, 612, 626, 628, 629, 640, 642, 646, 651 

Shown on engine 278.9 in model 222.1 

G11971780

Shown on engine 607.9 in model 176.0 

G11971781
WARNING Risk of accident  from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
CAUTION Risk of injury  to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.
AS18.00-Z-0001-01A 
INSPECT Check     
1.1 Warm up the engine until the coolant temperature has reached 80 °C Except engine 177, 178  
1.2 Warm up the engine until the engine oil temperature has reached 90 °C Engine 177  
1.3 Warm up the engine until the engine oil temperature is > 100 °C (oil cooler thermostat open) Engine 178  
2 Switch off engine IMPORTANT Engine 178
Before shutting off, idle in transmission mode "C" for at least 30 s.
 
3 Pull oil dipstick (4) out of oil-dipstick guide tube (5) and wipe off using lint-free cloth IMPORTANT The oil dipstick (4) and oil-dipstick guide tube (5) can be located at the front or rear of the engine, depending on the model series involved.  
4 Check engine oil level using oil dipstick (4) IMPORTANT Insert oil dipstick (4) up to end stop in oil dipstick tube (5) and leave there for at least 3 seconds to 5 seconds.
The level should be in the hatched area between the MIN. (4b) and MAX. (4a) markings on the oil dipstick (4).
The oil filling capacity between MIN. (4b) and MAX. (4a) is approx. 1.0 l.
IMPORTANT Dry sump engine
Check engine oil level within a period of 2 minutes after switching off the engine.
 
  If the engine oil level is too high or too low, correct it     
5 Adjust engine oil to correct level    
REFER TO CAPACITIES & SPECIFICATIONS Authorized engine oils (service)   BB00.40-P-0226A
REFER TO DESCRIPTION & OPERATION Service Information: Engine oil change Model 117, 156, 166, 172, 176, 190, 197, 204, SI18.00-P-0011A 205, 207, 212, 213, 217, 218, 222, 231, 238, 242, 246, 253, 292, model 164.1## #A as from 193232, model 164.8## #A as from 192868, model 169.### #J as from 386540, model 171.### #F as from 149734, model 203.### #R as from 251655, model 203.0## #A as from 938312, model 203.2## #F as from 885750, model 203.7## #A as from 944805, model 209.3## #F as from 216791, model 209.4## #T as from 078925, model 211.### #B as from 081230, model 211.### #X as from 220604, model 216.### #A as from 002778, model 219.### #A as from 097557, model 221.### #A as from 104927, model 230.### #F as from 129725, model 245.### #J as from 169768, model 251.0## #A as from 046500, model 251.1## #A as from 046570, model 463 with engine 113, 157, 273, 279, 642 SI18.00-P-0011A
REFER TO DESCRIPTION & OPERATION Service Information: Engine oil change Model 129, 163, 170, 208, 210, 215, 220, model 164.1## #A up to 193231, 164.8## #A up to 192867, 169.### #J up to 386539, 171.### #F up to 149733, 203.### #R up to 251654, 203.0## #A up to 938311, 203.2## #F up to 885749, 203.7## #A up to 944804, 209.3## #F up to 216790, 209.4## #T up to 078924, 211.### #A, 216.### #A up to 002777, 219.### #A up to 097556, 221.### #A up to 104926, 230.### #F up to 129724, 245.### #J up to 169767, 251.0## #A up to 046499, 251.1## #A up to 046569, model 463 with engine 112, 612, 628
IMPORTANT Check engine oil level again after correcting engine oil level. For this, repeat operation steps 3 and 4.
If engine oil level is too low

Add enough engine oil until the level is in the hatched area between the MIN. (4b) and MAX. (4a) markings on the oil dipstick (4).
If engine oil level is too high

Extract enough engine oil until the level is in the hatched area between the MIN. (4b) and MAX.
SI18.00-P-0011B