Electrical Function Schematic For Stationary Charging - PE54.10-P-2073-97NAH
MODEL 166 with ENGINE 276.821
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Charging current, energy flow | 27D |
| 1 | Charging current, energy flow | 27J |
| 10 | Lock charging cable, actuation | 29B |
| 11 | Charging voltage and charging current, request | 25E |
| 2 | Control Pilot, status | 15D |
| 2 | Control Pilot, status | 28D |
| 3 | External communication, data | 28B |
| 3 | External communication, data | 28D |
| 4 | Indicator lamp, actuation | 28B |
| 5 | Charging voltage and charging current, signal | 15E |
| 6 | Proximity detection, signal | 15D |
| 6 | Proximity detection, signal | 29D |
| 7 | Tolerable charging voltage/current, signal | 16E |
| 7 | Tolerable charging voltage/current, signal | 15J |
| 8 | Operating mode, status | 15H |
| 8 | Operating mode, status | 20H |
| 9 | Gear range, status | 6F |
| 9 | Gear range, status | 11F |
| A1 | Instrument cluster | 23F |
| A100 | High-voltage battery module | 27J |
| A100g1 | High-voltage battery | 28L |
| CAN B | Interior CAN | 16H |
| CAN B | Interior CAN | 21H |
| CAN C | Drive train CAN | 4F |
| CAN C1 | Engine CAN | 10F |
| CAN L | Hybrid CAN | 19E |
| CAN L | Hybrid CAN | 19K |
| N127 | Drivetrain control unit | 13E |
| N3/10 | ME-SFI [ME] control unit | 7F |
| N73 | Electronic ignition switch control unit | 18H |
| N82/2 | Battery management system control unit | 26L |
| N83/5 | Charger | 27D |
| X58/23 | Charger feed-in socket | 26A |
| Y3/8n4 | Fully integrated transmission control unit | 2F |