Telephone, Basic Function - GF82.70-P-9902A
MODEL ALL (CAR)
Overview :
This document contains information on:
- Telephony
- Overview of functional scope of telephony
- Bluetooth® coupling
- Two phone mode
- Car antenna connection
- Messaging (SMS)
- Contacts
- Ring tone
- Manual telephone favorites
- Relationships
General
The telephone function makes it possible to establish telephone connections in the vehicle. The telephone function is operated via the multimedia system's display and control elements, the buttons on the multifunction steering wheel or via the mobile phone. The telephone calls are conducted via the hands-free system and the speaker system. Here, it is primarily the speakers in front area of the vehicle that are actuated. In some markets, the multimedia system also optionally uses the mobile connections for data transfer for the Internet function. The connected devices can also be used for music playback.
Telephony
To establish a telephone connection in the vehicle, there are the following options:
- Via a mobile phone connected to smartphone integration
- Via the telephone control unit with an integrated SIM card
- Via a mobile phone coupled with Bluetooth®
The telephone function supports the following functions:
- Establish telephone connection.
- Disconnect telephone connection.
- Accept incoming call.
- Reject incoming call.
- Toggle calls (for switching between two connections).
- Join conference call.
- Transfer telephone call to mobile phone.
If there is an active telephone connection, the multimedia system switches the current audio source to mute.
Overview of functional scope of telephony
| Function | Code 545 (Connect 5 (NTG6)) | Code 547 (Connect 20 Entry (NTG6)) | Code 548 (Connect 20 MID (NTG6)) | Code 549 (Connect 20 HIGH (NTG6)) |
|---|---|---|---|---|
| Bluetooth® connection | X | X | X | X |
| Two phone mode | - | X | X | X |
| Messaging (SMS) | - | X | X | X |
Bluetooth® coupling
Additional function requirements:
- Mobile phone with hands-free profile (HFP) 1.0 or higher
- Bluetooth® on mobile phone activated
- Bluetooth® in multimedia system activated
A device is coupled via Bluetooth® in two steps:
- Authorize
- Connecting
The multimedia system can save authorizations for up to 15 mobile phones. Mobile phone authorization is only necessary once for each mobile phone. Exception: When authorizing a 16th device, authorization for the telephone not used for the longest time is deleted. The multimedia system automatically reconnects authorized mobile phones. The multimedia system automatically searches for all authorized mobile phones and connects to the mobile phones in the sequence of the last used. In two phone mode, the "second telephone" is also automatically reconnected. Bluetooth® audio equipment is also reconnected, provided that the current media source is Bluetooth® audio.
The user can also establish the connection to authorized mobile phones manually via the multimedia system.
Depending on the vehicle equipment, two mobile phones can be connected at the same time for making phone calls. An additional mobile phone can be connected via Bluetooth® for media mode.
On vehicles with mobile phone cradle, the following functions are possible via NFC (near-field communication):
- Authorizing a mobile phone
- Switching over the connected telephones Two phone mode
It is possible to connect two mobile phones at the same time using two phone mode. During two phone mode, the full functional scope is operable via the multimedia system on the mobile phone selected as the "first telephone".
The following functions are operable via the multimedia system with the current "second telephone":
- Incoming calls
- Incoming messages (SMS)
The user can swap the "first telephone" and "second telephone" at any time using the multimedia system's control and display elements.
Car antenna connection
In the following situations, the multimedia system receives and transmits the mobile phone signals via the vehicle's telephone antennas:
- Telephony via the telephone control unit (code 380 (Car telephony package))
- Telephony via mobile phone in the front mobile phone cradle (only with code 899 (Multifunction telephony))
On vehicles with code 897 (Wireless mobile phone charging), there is no connection of the front mobile phone cradle to the exterior antenna of the vehicle.
Depending on the equipment, an antenna splitter and/or an antenna changeover switch forwards the antenna signals to the telephone control unit or to the mobile phone cradle control unit.
For mobile phone connection via the mobile phone cradle control unit, a cellular telephone system antenna amplifier/compensator also amplifies the antenna signals. The antenna signals are transferred between the mobile phone cradle and the mobile phone by a capacitive coupling.
Messaging (SMS)
The messaging function provides the following functions:
- Display of SMS messages in the media display
- Reading out of SMS messages
- Writing and sending of SMS messages (including dictation function and text templates)
- Deleting SMS messages
- Calling a telephone number in an SMS message and calling back the person who sent the SMS message
- Calling up a URL in an SMS message (depending on equipment)
The multimedia system uses the Bluetooth® MAP profile for communication.
The multimedia system limits the length of the text displayed while driving.
Contacts
The address book in the multimedia system shows the following contacts:
- Contacts stored in the multimedia system
- Contacts loaded from the mobile phone via Bluetooth®
There are the following options for adding contacts to the address book in the multimedia system:
- Importing via the Bluetooth® connection
- Importing via the USB device
The multimedia system supports the import of contacts in vCard format. If contact synchronization is switched on, then the multimedia system automatically imports the mobile phone's contacts.
Ring tone
If the mobile phone supports in-band ringing, the multimedia system outputs the mobile phone's ring tone. Otherwise it outputs the set ring tone.
Manual telephone favorites
For quick access, up to 15 favorites can be manually added in the telephone main menu of the multimedia system.
Relationships
The relationships function makes it possible to save the relationships of contacts to people (e.g. nicknames). If voice control does not recognize a person (e.g. "call my mom"), voice control will ask which contact the name should be assigned to. The relationship between the name and the contact is then stored in the multimedia system as a relationship.
| Further basic functions | |||
|---|---|---|---|
| Inductive charging, basic function | Vehicles with code 897 (Wireless mobile phone charging), code 898 (Wireless charging in rear passenger compartment) or code 899 (Multifunction telephony) | GF82.70-P-1000A | |
| Smartphone integration, basic function | Model all (CAR) with code 14U (Smartphone integration package) |
GF82.70-P-9901A |