Preparing New Rear Fender - AR63.50-P-1400-03GQS
MODEL 166.0 with CODE Z04 (Light armoring)
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding, replaced by A 000 986 28 00 1K zinc dust paint | A 000 986 34 42 |
- Scribe separating points on rear fender (1) and cut (areas X1
and X2
).
Transfer dimensions from vehicle.
- Remove section from rear fender (1).
- Grind mating surfaces on rear fender (1) down to bare metal in crosshatched areas.
- Punch holes for
(areas A, B) in rear fender.
- Remove shavings. Use wet/dry vacuum cleaner.
- Coat insides of spot welding flange on rear fender (1) with zinc dust paint.