Install Spare Tire Well - AR64.20-P-1245-03GQ

MODEL 166, 292 

Shown on model 166.0 

1. Install spare wheel well (1), fit and fix in place
2. Drill Ø 6.7 mm rivet holes on spare wheel well (1) (areas E₁ , E₂ , F₁ and F₂ ).
3. Remove spare wheel well (1)
4. Deburr rivet holes on spare tire well (1) on both sides.
5. Coat insides of riveted joints with zinc dust paint.

   Shown on model 166.0 

6. Install spare wheel well (1) and fix in place.
7. Rivet spare wheel well (1) with Ø 6.5 12.5 blind rivet (areas G₁ , G₂ , G₃ and G₄ ).
8. Spare wheel well (1) (areas H₁ , H₂ , H₃ and H₄ ).
9. Spare wheel well (1) (areas I₁ and I₂ ).