Prepare Rear Panoramic Glass Roof For Installation - AR77.21-P-0600-02SX
MODEL 166, 207.3, 212, 221.1 with CODE 413 (Automatic panoramic sliding sunroof)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 10.04.2018 | Notes on removal/installation of bonded panoramic roof elements added. |
- Check rear panoramic roof (1) for damage.
If there is a problem,
Replace rear panoramic roof (1).
- Attach cup suction tools to outside of rear panoramic roof (1) and set down rear panoramic roof (1) with inside facing upwards on a suitable base with aid of helper.
- Apply cleaner using part of paper towel to bonding surfaces of rear panoramic roof (1) and wipe dry using other part of paper towel.
- Apply primer using enclosed applicator stick to bonding surfaces of rear panoramic roof (1) and allow to fully dry.