Automatically Controlled All-Wheel Drive (4Matic) Technical Data - GF28.00-P-0001-03AVJ
Model 253 with transmission 725.096
| Unit | Technical data | |
|---|---|---|
| 4MATIC transmission | ||
| Weight (with oil) with flange, all-wheel drive control unit including actuator and plate heat exchanger | kg | 21, 91 |
| Overall length (with transmission including transmission bell housing) | mm | 934, 9 |
| Overall length of transfer case with shaft flange to front axle (FA) and to the rear axle (RA) | mm | 426 |
| Gear oil | - | TITAN EG ATF 134FE |
| Transmission oil filling capacity (initial filling) | ml | 730 |
| Torque distribution FA/RA | % | Variable 0/100 to 50/50 |
| Front axle transmission (VAG 175 FE) left-hand drive vehicle |
||
| Ring gear diameter | mm | 175 |
| Weight (with oil) | kg | 17 |
| Axle ratio | i | 3, 27 |
| Front axle transmission (VAG 160 FE) right-hand drive vehicle |
||
| Ring gear diameter | mm | 160 |
| Weight (with oil) | kg | - |
| Axle ratio | i | 3, 27 |
| Rear axle gear (HAG 215 DV GF 120-4) |
||
| Ring gear diameter | mm | 215 |
| Weight (with oil) | kg | 29.7 |
| Axle ratio | i | 3, 27 |