Remove/Install Instrument Cluster - AR54.30-P-6015LW
Model 205
except code 464 (Full display digital instrument cluster)
Model 253 (except 253.992/993)
up to model year 2019
Shown on model 205
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Perform commissioning of instrument cluster (A1). | When replacing the instrument cluster (A1). | |
| AD00.00-P-2000-04B | |||
| 2 | Move steering wheel toward rear and down. | ||
| 3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 4 | Unclip cover (1) at bottom (arrows C) and release at retaining clamps (2). | Figure | |
| 5 | Unscrew bolts (3). | ||
| 6 | Release instrument cluster (A1) from retaining clamps (4) by pulling and remove until the electrical connector (5) is accessible. | ||
| 7 | Disconnect electrical connector (5). | ||
| 8 | Swivel instrument cluster (A1) upwards (arrow A) and remove to the left (arrow B). | ||
| 9 | Install in the reverse order. |