Emergency Release Of Charging Cable Plug At Charger Feed Socket - AR54.10-P-5111LVH

Model 253.311/353/354/911/953/954 

Courtesy of MERCEDES-BENZ USA

Shown on model 253.954 

	Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
	General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system		AH00.00-Z-0300-01A
	Notes on battery		AH54.10-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Emergency release
1	Unlock vehicle and open trunk lid.
2	Unclip cover (1).
3	Pull plug emergency release (2) in direction of arrow using extraction hook and disconnect charging cable connector from charger feed-in socket.	Before pulling the plug emergency release (2), make sure that the electrical charging at the charging station/infrastructure has been completed. By pulling the plug emergency release (2), the turntable platform of the mechanical emergency release on the actuator motor of the electrical release is twisted and the charging cable connector is released.
		Extraction hook	Fig 1
4	Attach cover (1).
5	Close charger feed-in socket flap.
6	Close socket flap in rear bumper.

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA