Remove/Install Center High-Mounted Stop Lamp - AR82.10-P-5375LWS
Model 205.2
Model 253.1/9
Model 293
Shown on MODEL 205.2
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove upper liftgate trim. | Model 293 | AR72.20-P-6631EQ |
| Model 205.2 | AR72.20-P-6631LWS | ||
| Model 253.1/9 | AR72.20-P-6631LWG | ||
| 2 | Remove water hose (2) from spray nozzle. | ||
| 3 | Disconnect electrical connector (3). | ||
| 4 | Disconnect electrical connection (4). | ||
| 5 | Unscrew nuts (5) and remove roof spoiler (1). | ||
| 6 | Remove screw/bolts (6). | ||
| 7 | Detach electrical plug (7) from roof spoiler (1). | ||
| 8 | Push catch (8) on roof spoiler (1) downwards using a suitable tool. | ||
| 9 | Remove center brake lamp (E21) from the roof spoiler (1). | ||
| 10 | Install in the reverse order. |