Check Grab Handle On Roof - AR68.30-P-4330-01NKB
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
Model 117, 118, 156, 176, 177, 205, 213, 222, 242, 246, 247, 253, 293
- Push grab handle (1) to joining direction at clips with both hands (arrows).
- Completely fold out grab handle (1), pull downward and check whether it is seated tightly at both mounting points.
- Push grab handle (1) to joining direction at clips with both hands (arrows).
It must be ensured that the grab handle (1) is seated tightly.
A clip not engaged can pose an injury risks when entering or exiting the vehicle.
If a clip detaches during the tensile test.
↓
Check clip, if necessary replace and repeat test.