Remove/Install Longitudinal Member Paneling - AR88.80-P-6000LWG

Model 253 

Model 293 

Shown on model 253 except code 846 (running board) 

Fig 1: Longitudinal Member Panel Component Location - Model 253 (Except Code 846)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Open doors.
2	Mask off rear door in front bottom area with a felt strip.	Scratches to the longitudinal member paneling (1) through the rear door can be prevented by felt strips.
		Felt strip	*BR00.45-Z-1150-02A
3	Remove longitudinal member panel (1).	Model 253	AR88.80-P-6000-03LWG
		Model 293	AR88.80-P-6000-03LWR
4	Install in the reverse order.