Remove/Install Roller Sunblind For Side Window - AR72.12-P-2000LWG

Model 205.0/1/2, 213, 253, 293 

with code 313 (Roller sunblinds in left and right rear doors) 

Shown on model 205.0 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 

Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 

	Remove/install
1	Remove door lining (1) from left or right rear door		AR72.12-P-1010LW
2	Unclip trim piece (2) and remove	Mounting wedge	Fig 1
3.1	Drill plastic spot welds (3) and remove cover (4)	If the roller sun blind (5) is fastened with plastic spot welds (3). : Handle (6) of roller sunblind (5) must lie outside of cover (4). : Replace drilled plastic spot welds (3) with bolts. Fasten cover (4) with bolts from repair kit.
3.2	Unscrew bolts and remove cover (4)	If the roller sun blind (5) is fastened with bolts. : Handle (6) of roller sunblind (5) must lie outside of cover (4).
4	Remove roller sun blind (5)
5	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA