Preparations for distance and comparison measurements - AR40.30-P-0401NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Vehicle Components For Distance And Comparison Measurements - Shown On Model 246 (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 2: Vehicle Components For Distance And Comparison Measurements - Shown On Model 246 (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 3: Vehicle Components For Distance And Comparison Measurements - Shown On Model 246 (3 Of 3)

Courtesy of MERCEDES-BENZ USA

Shown on suspension 170 589 00 63 00 

Fig 4: Left And Right Side Support Dimensions - Shown On Suspension (170 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

	Risk of injury  due to fan starting unexpectedly	Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes.	AS20.40-Z-0001-01A
	Remove
1	Align the vehicle	Align the vehicle horizontally in the longitudinal direction by loading with weights as appropriate. Measure vehicle inclination across the door sills, e.g. using a spirit level.
2	Remove seal (10)	MODEL 242, 246 For a distance and comparative measurement on front axle.
3	Remove left wiper arm (7)	MODEL 242, 246 For a distance and comparative measurement on front axle.
			AR82.30-P-6100NKB
4	Remove right cover (8a) and left cover (8b)	MODEL 242, 246 For a distance and comparative measurement on front axle.
5	Remove inner covering (9)	MODEL 242, 246 For a distance and comparative measurement on front axle.
6.1	Remove engine compartment paneling	MODEL 117 with ENGINE 133, 270 MODEL 156 MODEL 176 with ENGINE 133, 270 MODEL 242 with ENGINE 270, 780 MODEL 246 with ENGINE 270 For a distance and comparative measurement on front axle.
			AR61.20-P-1105NKB
6.2	Remove bottom section of soundproofing	MODEL 117 with ENGINE 607, 651 MODEL 176 with ENGINE 607, 651 MODEL 246 with ENGINE 607, 651 For a distance and comparative measurement on front axle.
			AR94.30-P-5300NKB
7	Remove fender liner in front fender	For a distance and comparative measurement on front axle.
			AR88.10-P-1300NKB
8	Detach left and right underfloor paneling		AR61.30-P-1001NKB
9	Screw in threaded pins (07n) of suspension (07) on first threaded holes in front of reinforcement brace (3)	Mount	Fig 4
10	Insert and adjust hanger (07)		AR40.30-P-0401-01NKB
		Dimension to be set on holding pipe 164 589 04 63 00 or holding pipe 170 589 00 63 01	*BE40.30-P-1002-10B
		Dimension to be set on suspension 170 589 00 63 00	*BE40.30-P-1001-10B
		Measuring set	Fig 8
		Retaining tube	Fig 10
		Mount	Fig 4
		Retaining tube	Fig 7
11	Insert telescopic measuring rod (06) with connecting parts at retaining bolt with tubular bubble level (024b)	Use relevant measuring bolt and measuring tip (024) for the corresponding distance or comparison measurement.
		Connecting pieces	Fig 11
		Telescopic measuring rod	Fig 5
		Telescopic measuring rod	Fig 6
		Measuring set	Fig 8
	Measure
12	Carry out distance and comparison measurements on front and rear axles		AR40.30-P-0402NKB
	Install
13	Detach cradle (07) and threaded bolts (07n)	Mount	Fig 4
14.1	Install lower engine compartment paneling	MODEL 117 with ENGINE 133, 270 MODEL 156 MODEL 176 with ENGINE 133, 270 MODEL 242 with ENGINE 270, 780 MODEL 246 with ENGINE 270 For a distance and comparative measurement on front axle.
			AR61.20-P-1105NKB
14.2	Install bottom sections of soundproofing	MODEL 117 with ENGINE 607, 651 MODEL 176 with ENGINE 607, 651 MODEL 246 with ENGINE 607, 651 For a distance and comparative measurement on front axle.
			AR94.30-P-5300NKB
15	Install fender liner in front fender	For a distance and comparative measurement on front axle.
			AR88.10-P-1300NKB
16	Install left and right underfloor paneling		AR61.30-P-1001NKB
17	Install inner cover (9)	MODEL 242, 246 For a distance and comparative measurement on front axle.
18	Install right cover (8a) and left cover (8b)	MODEL 242, 246 For a distance and comparative measurement on front axle.
19	Install left wiper arm (7)	MODEL 242, 246 For a distance and comparative measurement on front axle.
			AR82.30-P-6100NKB
20	Install seal (10)	MODEL 242, 246 For a distance and comparative measurement on front axle.

Fig 5: Telescopic Measuring Rod (124 589 01 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Telescopic Measuring Rod (124 589 02 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 7: Retaining Tube (164 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 8: Measuring Set (168 589 07 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 9: Mount (170 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 10: Retaining Tube (170 589 00 63 01)

Courtesy of MERCEDES-BENZ USA

Fig 11: Connecting Pieces (124 589 08 63 00)

Courtesy of MERCEDES-BENZ USA