Remove/install trunk lid handle - AR88.50-P-5062NKC

MODEL 117.3 

Fig 1: Trunk Lid Handle Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove
1	Open luggage compartment lid
2	Unscrew bolts (2) and trunk lid handle strip (1)
3	Lift trunk lid handle strip (1) starting at right side until right retaining clip (3) can be unclipped	Carefully lift trunk lid handle strip (1), otherwise the trunk lid handle strip (1) can break.
		Extraction hook	Figure
4	Unclip right retaining clip (3)	Clip remover	Figure
5	Lift trunk lid handle strip (1) in area of center retaining clip (3)	Carefully lift trunk lid handle strip (1), otherwise the trunk lid handle strip (1) can break in the area of the lock actuation.
6	Unclip center retaining clip (3)	Clip remover	Figure
7	Lift trunk lid handle strip (1) in area of center retaining clip (3)	Carefully lift trunk lid handle strip (1), otherwise the trunk lid handle strip (1) can break.
8	Unclip left retaining clip (3) and remove trunk lid handle strip (1)	Clip remover	Figure
	Install
9	Check retaining clip (3) for damage, replace if necessary
10	Clip trunk lid handle strip (1) into trunk lid
11	Close trunk lid

Fig 2: Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA