Remove/install switches for rear door power windows - AR72.29-P-0002NKB

MODEL 117, 156, 166, 176, 212 as of 3/1/11, 218, 242, 246 

Shown on MODEL 246 

Fig 1: Switches For Rear Door Power Windows Remove/Install Components - Shown On Model 246

Courtesy of MERCEDES-BENZ USA

	Remove
1	Attach adhesive foil (3) to armrest (2) on rear door (1)	Attach adhesive foil (3) directly to left rear power window switch (S21/3) or right rear power window switch (S21/4) as shown.
2	Unclip left rear power window switch (S21/3) or right rear power window switch (S21/4) with clip remover (4)	Clip remover	Fig 2
3	Remove left rear power window switch (S21/3) or right rear power window switch (S21/4) from armrest (2) until electrical connector (5) is accessible
4	Disconnect electrical connector (5) and remove left rear power window switch (S21/3) or right rear power window switch (S21/4)
5	Remove adhesive foil (3)
	Install
6	Connect electrical connector (5) on left rear power window switch (S21/3) or right rear power window switch (S21/4)
7	Press left rear power window switch (S21/3) or right rear power window switch (S21/4) into armrest (2)	The left rear power window switch (S21/3) or right rear power window switch (S21/4) should arrest perceptibly in the armrest (2).
8	Check power window for proper function

Fig 2: Clip Remover (000 589 90 63 00)

Courtesy of MERCEDES-BENZ USA