000 588 00 23 00 Adjusting gauge - WS82.00-P-0028B

MODEL ALL 

Use in FG 82/Set B 

Intended use: 

Calibration target for Night View Assist for adjusting the camera on support systems.

Testing equipment category CAT_A.

Technical note: 

Application in combination with a headlamp aimer or other suitable tripod.

Procurement information: 

This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found below .

Manufacturer 

ROMESS Rogg Apparate + Electronic GmbH

• Type/model: Calibration target for Night View Assist Article no.: 09840-10
• Accessories: Adaptation for Hella headlamp aimer (45° rotated bracket).

  Article no.: 09840-11