Remove/install HERMES antenna - AR82.95-P-0030NKT

MODEL 117.3 with CODE 360 (HERMES UMTS) 

MODEL 117.3 with CODE 362 (HERMES LTE) 

Fig 1: HERMES Antenna Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m)
3	Unfasten rear shelf until the HERMES antenna (1) is accessible		AR68.30-P-4581NKC
4	Release and disconnect electrical connection (2)
5	Lift retaining springs (3) in the direction of arrow (A) and slide HERMES antenna (1) in the direction of arrow (B)	You must ensure that the retaining springs (3) are seated correctly.
6	Rotate HERMES antenna (1) through 900 and remove
7	Install in the reverse order