LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> CLA250 4Matic, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment - 117 Chassis >> Testing & Repair >> Remove/install inside rearview mirror - AR68.40-P-0001NKB

Remove/install inside rearview mirror - AR68.40-P-0001NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Inside Rearview Mirror Remove/Install Components - Shown On Model 246 (1 Of 3)
G10251345Courtesy of MERCEDES-BENZ USA
Fig 2: Inside Rearview Mirror Remove/Install Components - Shown On Model 246 (2 Of 3)
G10251346Courtesy of MERCEDES-BENZ USA
Fig 3: Inside Rearview Mirror Remove/Install Components - Shown On Model 246 (3 Of 3)
G10251347Courtesy of MERCEDES-BENZ USA
DANGER Risk of injury  caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. Wear protective gloves and safety glasses. AS60.00-Z-0008-01R
IMPORTANT Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Release trim (2.1, 2.2) from base (3A67) of inside rearview mirror    
2.1 Detach cover (2.1) from cover (2.2) and remove both covers (2.1, 2.2) MODEL 117, 156, 176, 242, 246
without CODE 348 (Emergency call/assistant system)
without CODE 350 (Ecall Europe, gen. 2 emergency call system)
without CODE 882 (Interior motion sensor)
 
2.2 Remove trim (2.1) from paneling (2.2) and remove trim (2.1) MODEL 117, 156, 176, 242, 246
with CODE 348 (Emergency call/assistant system)
MODEL 117, 156, 176, 242, 246
with CODE 350 (Ecall Europe, gen. 2 emergency call system)
MODEL 117, 156, 176, 242, 246
with CODE 882 (Interior motion sensor)
 
3 Disconnect electrical connector (9) from antitheft warning system/emergency call system button group (S93/3) and remove panelings (2.2) MODEL 117, 156, 176, 242, 246
with CODE 348 (Emergency call/assistant system)
MODEL 117, 156, 176, 242, 246
with CODE 350 (Ecall Europe, gen. 2 emergency call system)
MODEL 117, 156, 176, 242, 246
with CODE 882 (Interior motion sensor)
 
4 Disconnect electrical connectors (10, 11)    
5 Turn inside rearview mirror (A67) on mirror base (12) to right with open end wrench (01) and remove from mirror holder    
6 Install in the reverse order    
  Settings     
7 Adjust inside rearview mirror (A67) to steering variant MODEL 117, 156, 176, 242, 246
with CODE U62 (Exterior light and sight package)
When replacing inside rearview mirror (A67).
 
  AR68.40-P-0001-01A
8 Connect diagnostic system and start up garage door opener transmitter unit control unit MODEL 117, 156, 242, 246
with CODE 232 (Garage door opener with frequency 284-390 MHz)
When replacing inside rearview mirror (A67).
 
IMPORTANT Notes on programming garage door opener transmitter unit   AH68.05-P-0002-01A
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04A