Remove/Install Rear Backrest Angle/Inclination Switch - AR91.29-P-1772LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 205.0/1, 213.0 with code 287 (Through-loading feature)

MODEL 205.2/3/4, 213.2, 238, 253, 293

Fig 1: Rear Backrest Angle/Inclination Switch Components Location - Model 253 (Shown On Model 205.0)

Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 with code 287 (Folding backrests in rear), on the left backrest

	Remove/install
1.1	Remove left or right rear seat backrest.	Model 205.0/1, 213.0 with code 287 (Through-loading feature) Model 205.2/3/4, 213.2, 238.4, 253, 293
		Model 205.0/1, 213.0 with code 287 (Through-loading feature) Model 205.2/3, 213.2 Model 253 (except 253.992/993), 293	AR91.12-P-1720LW
		Model 205.4, 238.4	AR91.12-P-1721LWR
		Model 253.992/993	AR91.12-P-1721RFW
1.2	Remove right rear seat backrest.	When removing right rear backrest inclination switch (S54/6). Model 238.3	AR91.12-P-1722LWO
1.3	Remove left rear seat backrest.	When removing left rear backrest inclination switch (S54/5) Model 238.3	AR91.12-P-1724LWO
2	Counterhold pivot bearing (1) and unscrew screw (2).	Do not jam bearing pin of pivot bearing (1). Otherwise the spacer ring in the backrest frame may be damaged. Bolt, pivot bearing to backrest frame	*BA91.12-P-1007-03M
3	Remove pivot bearing (1) with rear passenger compartment seat backrest inclination switch (S54/5, S54/6).	Ensure that guide pin (4) is seated correctly in backrest frame.
4	Remove locking pin (3).
5	Remove rear passenger compartment seat backrest inclination switch (S54/5, S54/6) from pivot bearing (1).	Check that the rear passenger compartment seat backrest inclination switch (S54/5, S54/6) is correctly seated in the pivot bearing (1).
6	Install in the reverse order.

REAR SEATS

Number	Designation		Model 205.0	Model 205.1
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	40	40

REAR SEATS

Number	Designation		Model 205.2	Model 205.3
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	65	40

REAR SEATS

Number	Designation		Model 205.4	Model 213.0
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	65	65

REAR SEATS

Number	Designation		Model 213.2	Model 238.3
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	65	40

REAR SEATS

Number	Designation		Model 238.4	Model 253
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	65	65

REAR SEATS

Number	Designation		Model 293
BA91.12-P-1007-03M	Bolt, pivot bearing to backrest frame	Nm	65