Remove/Install Front Seat Lumbar Support Air Cushion - AR91.25-P-1450LWX

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 205, 253 with code 555 (AMG-Performance Seat)

MODEL 213 with code 275 (Memory Package (driver's seat, steering column and mirror)) with code 555 (AMG-Performance Seat)

MODEL 213 with code 555 (AMG-Performance Seat) with code P65 (Seat comfort package)

Fig 1: Front Seat Lumbar Support Air Cushion Components Location - Model 253 With Code 555

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove seat backrest padding.		AR91.10-P-0003LWX
2	Detach retaining clips (1), remove air cushion (2) and place to one side.
3	Unfasten felt tapes (3).
4	Remove lumbar support pneumatic pump (M25/4, M25/5) and place to one side.
5	Remove lumbar support electropneumatic controller unit (N32/23, N32/24) and place to one side.
6	Disconnect electrical connections (4).
7	Remove air cushion (2), lumbar support electropneumatic controller unit (N32/23, N32/24) and lumbar support pneumatic pump (M25/4, M25/5) together.	The air cushion (2), the lumbar support electropneumatic controller unit (N32/23, N32/24) and the lumbar support pneumatic pump (M25/4, M25/5) are one unit and can only be changed together.
8	Install in the reverse order