Remove Cover Of Integrated Head Restraint - AR91.16-P-0301-01NKB
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 176
with code 555 (AMG-Performance Seat)
MODEL 190.3
up to model year 2018
with code 555 (AMG-Performance Seat)
MODEL 205
up to model year 2019
with code 555 (AMG-Performance Seat)
MODEL 253
with code 555 (AMG-Performance Seat)
Drilling template
- Print out drilling template drawing.
- Determine dimensions (A, B) of print-out.
- Determine scaling factor.
Divide dimension specified (A) by dimension determined (A).
Divide dimension specified (B) by dimension determined (B).
- Copy printed drilling template to original size using the determined scaling factor.
- Cut out drilling template.
- Fix cut-out drilling template (1) in place on cover (2).
- Make markings (arrows) in accordance with drilling template (1).
- Remove drilling template (1).
- Drill bores and so make screws below accessible.
- Remove previously exposed screws.
- Remove cover (2).