Engine Support (Engine Side) - BA22.10-P-1000-02A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 112, 113, 137, 152, 156, 157, 159, 256, 271, 272, 273, 274, 275, 276, 277, 278, 279, 285, 628, 629, 642, 646, 647, 648, 651, 654, 656
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 112 (except 112.916/953) | Engine 112.916/953 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 60 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | - | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 113 | Engine 137 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 90 | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | - | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 152 | Engine 156 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 18 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 9 | 9 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 157 | Engine 159 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 9 | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 256 | Engine 271 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 12 | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | 8 | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | 8 | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 272 | Engine 273 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 9 | 9 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 274 | Engine 275 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 90 | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 10 | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | 10 | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 276 | Engine 277 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | 45 |
| Stage 2 | ∠° | - | 120 | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 13 | 13 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | 9 | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 278 | Engine 279 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 13 | 13 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 285 | Engine 628 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | 20 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | - | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 629 | Engine 642 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 9 | 13 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 646 | Engine 647 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | - | - | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 648 | Engine 651 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | - | 9 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | - | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | - | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | - | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Engine 654 | Engine 656 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-02A | Bolt/nut, engine support to crankcase | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA22.10-P-1002-02A | Bolt, engine mount carrier plate at front on engine support | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA22.10-P-1003-02A | Bolt, heat shield to engine support | Nm | 8 | 8 | |
| BA22.10-P-1004-02A | Bolt, heat shield to crankcase | Nm | 8 | - | |
| BA22.10-P-1005-02A | Bolt, heat shield to timing case | Nm | - | - | |
| BA22.10-P-1006-02A | Screw, high-voltage on-board electrical system electrical line heat shield to engine carrier heat shield | Nm | - | - | |
| BA22.10-P-1007-02A | Screw/bolt, engine support to cylinder head | Nm | 57 | - | |
| BA22.10-P-1008-02A | Screw, bearing bracket to oil pan/crankcase | M10 | Nm | 58 | - |
| BA22.10-P-1009-02A | Screw, engine support to cylinder head (transverse installation) | Stage 1 | Nm | 20 | - |
| Stage 2 | ∠° | 90 | - | ||