LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Engine Suspension - 253 Chassis) >> Testing & Repair >> Remove/Install Rear Engine Support - AR22.10-P-4360LWB

Remove/Install Rear Engine Support - AR22.10-P-4360LWB

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Engine 264, 274, 276.8, 642, 651, 654, 656 in model 253 

Engine 264, 274, 276.8, 651, 654 in model 205 

MODIFICATION NOTES

07.09.2018 Screw/bolt, rear engine support to frame floor assembly Model 205 BA22.10-P-1005-03E

Shown: model 205 with engine 651 without code M005 (4MATIC) 

Fig 1: Rear Engine Support Components Location - Engine 264, 274 In Model 253 (Shown: Model 205 With Engine 651 Without Code M005)
G14185156Courtesy of MERCEDES-BENZ USA

Shown on model 205 with engine 651 with code M005 (4MATIC) 

Fig 2: Rear Engine Support Components Location - Engine 264, 274 In Model 253 (Shown: Model 205 With Engine 651 With Code M005)
G14185157Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects. Wear protective gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
Notes on bolted connections with self tapping screws   AH00.00-P-0007-01SF
Notes on self-locking nuts and bolts   AH00.00-N-0001-01A
REMOVINGINSTALLING Remove/install     
1 Remove center and rear section of lower engine compartment lining.   AR61.20-P-1105LW
2 Support transmission (4).    
REFER TO SPECIAL TOOLS 000 588 10 62 00 Support plate   WS26.00-P-3309B
REFER TO SPECIAL TOOLS 000 588 11 62 00 Major assembly mount   WS01.00-P-0092B
3.1 Remove bolts (1a). Engine 264, 274, 276.8, 651, 654 in model 205 except code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Engine 264, 274, 651, 654 in model 253 except code M005 (Vehicles with 4MATIC/all-wheel drive)  
    TORQUE SPECIFICATION Engine 264 in model 253 (except 253.388/389/988/989/992/993) except code M005 (Vehicles with 4MATIC/all-wheel drive) *BA22.10-P-1004-03M 
    Engine 274 in model 253.942/948 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Engine 651 in model 253 except code M005 (Vehicles with 4MATIC/all-wheel drive)		  
    Engine 654 in model 253 except code M005 (Vehicles with 4MATIC/all-wheel drive) Bolt, engine crossmember to rear engine mount  
    TORQUE SPECIFICATION Model 205 with engine 264, 274, 276.8, 651, 654 except code M005 (Vehicles with 4MATIC/all-wheel drive) Rear engine mount on engine support *BA22.10-P-1004-03E 
3.2 Remove nuts (1c). Engine 264, 274, 276.8, 642, 651, 654, 656 in model 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Engine 264, 274, 276.8, 651, 654 in model 205 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    TORQUE SPECIFICATION Model 253 (except 253.388/389/988/989/992/993) with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) *BA22.10-P-1004-03M 
    Model 253 with engine 654, 656 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Model 253.303/305/309/903/905/909 with engine 651 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Model 253.325/925 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Model 253.346/349/354/943/946/949/954 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive)  
    Model 253.364/964 with engine 276.8 with code M005 (Vehicles with 4MATIC/all-wheel drive) Bolt, engine crossmember to rear engine mount  
    TORQUE SPECIFICATION Model 205 with engine 264, 274, 276.8, 651, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) Rear engine mount on engine support *BA22.10-P-1004-03E 
4 Remove screws (2a) and remove engine carrier (2). NOTES Never use an impact wrench or pneumatic tools to remove/screw in screws (2a). Non-observance results in damage to thread.  
    TORQUE SPECIFICATION Model 253 (except 253.388/389/988/989/992/993) with engine 264 *BA22.10-P-1005-03M 
    Model 253 with engine 654, 656
Model 253.303/305/309/903/905/909 with engine 651		  
    Model 253.325/925 with engine 642 Model 253.346/349/354/942/943/946/948/949/954 with engine 274  
    Model 253.364/964 with engine 276.8Bolt, engine crossmember to frame floor assembly  
    TORQUE SPECIFICATION Engine 264, 274, 276.8, 651, 654 in model 205Screw/bolt, rear engine support to frame floor assembly *BA22.10-P-1005-03E 
5 Install in the reverse order.    
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number Designation Model 205
BA22.10-P-1004-03E Rear engine mount on engine support Nm 30
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number Designation Model 253 (except 253.388/389/988/98 9/992/993)
BA22.10-P-1004-03M Bolt, engine crossmember to rear engine mount M6 Nm 18
M8 Nm 30
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number Designation Model 205
BA22.10-P-1005-03E Screw/bolt, rear engine support to frame floor assembly M10x22 Silver Nm -
Black Nm -
M10x24 Black Nm -
M10x38 Nm -
M10x20 Stage 1 Nm 30
Stage 2 Nm 50
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number Designation Model 253 (except 253.388/389/988/98 9/992/993)
BA22.10-P-1005-03M Bolt, engine crossmember to frame floor assembly Stage 1 Nm 30
Stage 2 Nm 50
scientia non olet · About LEMON Manuals