116 589 12 33 00 Pulling Arms - WS26.00-P-0017C
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 711.6 in model 204
Transmission 716.6, 717.40/42/45/46, 724.0
Transmission 722.9 in model 204, 205, 207, 212, 216, 217, 218, 221, 222
Transmission 724.2 in model 253
Transmission 725.0 in model 205, 207, 212, 213, 217, 218, 222, 223, 238, 253, 257, 290
Transmission 725.1 in model 206, 257
Use in FG 26/27/33/Set C
Purpose:
Puller arms (2 pieces) for pulling off the reverse idler gear and deep-groove ball bearing on intermediate shaft.
Transmission 724.0/2:
Puller arms for disassembling drive shaft.
Technical Note:
In combination with W 000 589 88 33 00 Puller, two-way.