000 588 04 19 00 Articulation Angle Inclinometer - WS26.00-P-0140B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Transmission all (4xWD, CAR, Heavy transporter, Light transporter)

Use in FG 26/27/28/41/Set B

Purpose:

Electronic inclinometer for measuring angles at defined contact points.

Test equipment category CAT_A.

Reference information:

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is listed below.

Courtesy of MERCEDES-BENZ USA

NOTE: Device 09935-10 is the basic unit used for determining the articulation angle.

The combined measuring equipment with article number 09905-30 also has a measuring mode for determining the vehicle level.

Manufacturer

ROMESS Rogg Apparate + electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Type/model: Electronic inclinometer
Article no.: 09935-10