Crankcase Ventilation, Cylinder Head Cover - BA01.20-P-1000-03B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 264
CRANKCASE VENTILATION SYSTEM, CYLINDER HEAD COVER
| Number | Designation | Engine 264 | ||
|---|---|---|---|---|
| BA01.20-P-1001-03B | Screw/bolt, cylinder head cover to cylinder head | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 90 | ||
| BA01.20-P-1002-03B | Bolt, oil separator to crankcase | Nm | 9 | |
| BA01.20-P-1003-03B | Bolt, filler neck to cylinder head cover | Nm | 9 | |
| BA01.20-P-1004-03B | Bolt, bleed line for oil separator to crankcase | Nm | 9 | |
| BA01.20-P-1005-03B | Bolt, crankcase ventilation system vent line to crankcase | Nm | 9 | |
| BA01.20-P-1006-03B | Bolt, vent valve to purge line | Nm | 4 | |
| BA01.20-P-1007-03B | Screw, full load vent line to exhaust gas turbocharger | Nm | 9 | |
| BA01.20-P-1008-03B | Screw, full load vent line to timing case cover | Nm | 9 | |
| BA01.20-P-1009-03B | Screw, right Engine cover holder to cylinder head cover | Nm | 20 | |
| BA01.20-P-1010-03B | Ball head, Engine cover to cylinder head cover/vacuum pump | Nm | 5 | |