Crankcase Check Values - BE01.40-P-1000-04A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 270, 274
CHECK VALUES FOR CRANKCASE
| Number | Designation | Engine 133 | Engine 270 | ||
|---|---|---|---|---|---|
| BE01.40-P-1001-04A | Crankshaft bearing | Basic bore diameter | mm | 59, 000...59, 019 | 59, 000...59, 019 |
| Basic bore width at fit bearing | mm | 19, 967...20, 00 | 19, 967...20, 00 | ||
| Permissible out-of-roundness and taper of basic bore | mm | 0, 03 | 0, 03 | ||
CHECK VALUES FOR CRANKCASE
| Number | Designation | Engine 274 | ||
|---|---|---|---|---|
| BE01.40-P-1001-04A | Crankshaft bearing | Basic bore diameter | mm | 59, 000...59, 019 |
| Basic bore width at fit bearing | mm | 19, 967...20, 00 | ||
| Permissible out-of-roundness and taper of basic bore | mm | 0, 03 | ||