000 588 04 62 00 Removal Fixture - WS01.00-Z-3014KOB
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine all (CAR, Heavy transporter, Light transporter)
Use in FG 01/set B
Purpose:
Engine removal device for installing/removing engines.
NOTE:
The removal fixture consists of a C-bracket with a support beam and shackles.
In combination with suitable lifting gear (for example: overhead crane, fork-lift truck, boom crane and load tilter).
In combination with suitable lifting gear (for example: overhead crane, fork-lift truck, boom crane and load tilter).
Procurement information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
Manufacturer
Erwin Schairer GmbH
Keltenstrasse 9
72469 Meβstetten, Germany
Germany
http://www.erwinschairer.de
- Type/model: Engine removal device WBM 0304.01
Article no.: 100