000 588 01 21 00 Endoscope - WS01.00-P-0097B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine all (4xWD, CAR, Heavy transporter, Light transporter, smart)
Use in FG 01/Set B
Purpose:
Endoscope for assessing the cylinder barrel, valves and piston crown for all engines as well as cavities.
Procurement information:
Sale of this workshop equipment does not take over the regular replacement part ordering process in GLC/LC, but instead directly over the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier can be found in the maintenance system document (see below).
NOTE:
Various adaptations for use in combination with a camera can be obtained over the manufacturer.
Manufacturer:
GmbH & Co.KG
MittelstraBe 8
78532 Tuttlingen
Germany
MittelstraBe
- Model: Autoscope
Article no.:80912
- Model: Flexoscope
Article no.:80902