Engine Replacement Analysis Sheet, Form - OF01.10-P-3000-01A

Engine all (4xWD, CAR, Heavy transporter, Light transporter, smart) 

The procedure applies without limit in time until further notice!

Company-owned sales and service outlet/Representative agency no./Dealership no.

Vehicle identification number 

Engine no. 

Date

Name of inspector (Service Advisor/Team Leader) Telephone no. for queries

This analysis sheet is to be filled out by the service advisor/team leader and the workshop employee, and it is to be enclosed with the Engine together with the XENTRY-DAS diagnostic data and the part causing the damage (e.g. coolant hose, etc.).

1. Customer complaint to be filled out by service advisor/team leader: 

Please describe complaint:

□ Noise:

□ Oil loss:

□ Coolant loss:

□ Oil consumption:

□ Power shortage:

□ Other/Comment:

2. Diagnosis to be filled in by the workshop employee: 

□ Noises (what type, under which operating condition, rpm, speed, load, idle, deceleration?):

□ Oil loss (leaking outwards? Location, identification of position, oil in coolant?):

□ Coolant loss (for test, see WIS)

(Leaking outwards? Location, identification of position, coolant in oil? Coolant in cylinder?):

□ Oil consumption (for test, see WIS)

(Result of oil consumption measuring drive, result of compression test and pressure loss measurement):

□ External damage?

□ Other faults/other comments (quick test report and fault freeze frame data):

□ Power shortage (for test, see WIS)

(Quick test report and fault freeze frame data, compression test and pressure loss measurement):

□ Maintenance/oil change performed regularly? □ Yes □ No

□ Affected cylinder(s):