LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Tools - 253 Chassis) >> Shop-Made Tools >> Puller Hook For Lower Part Of Clip On Sliding/Pop-Up Roof Trim - WF58.50-P-7720-03A

Puller Hook For Lower Part Of Clip On Sliding/Pop-Up Roof Trim - WF58.50-P-7720-03A

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

All models 

  1. Fabricate puller hook using welding wire Ø (2 mm dia.)
    NOTE: Fabricate puller hook (arrow), so that it passes through opening at bottom of clip.
    G14139169Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals