Remove/Install Sideview Mirror Glass Adjustment Drive - AR88.70-P-9060LF
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 217, 222, 238, 253, 293
Shown on left outside mirror, model 222
| Remove/install | |||
| 1 | Remove outside mirror trim. | AR88.70-P-9040LF | |
| 2 | Disconnect electrical connector of the glass adjustment drive (1). | ||
| 3 | Remove screw/bolt (2). | ||
| 4 | Release catch hooks (arrows) and remove glass adjustment drive (1). | ||
| 5 | Install in the reverse order |