Move Mirror Glass Of Outside Mirror To Parking Position, Basic Function - GF88.79-P-1003A

Model all (CAR) 

with code 275 (Memory Package (driver's seat, steering column and mirror)) 

Overview 

This document contains the following information:

• General 
• Function requirement 
• Function 
  • Moving mirror glass of outside mirror to parking position
  • Memory function

General 

The mirror glass of the front-passenger outside mirror can automatically be moved into the freely adjustable parking position when backing up.

The parking position directs the view of the driver during parking to an area beside the rear wheel. Damage to the tires or rims can thus be prevented.

Function requirement 

• Circuit 15 ON

Function 

Moving mirror glass of outside mirror to parking position

To be able to use the parking position, this must be previously defined and saved.

The parking position is then moved to every time if the front-passenger mirror is selected via the corresponding adjustment control element and reverse gear is engaged.

If the mirror glass adjustment is changed while in parking position, the set position is saved as the new parking position.

The mirror glass of the front-passenger outside mirror is automatically moved back to the original position if one of the following statuses is fulfilled:

• Circuit 15 OFF
• Reverse gear not engaged for longer than 10 s
• Vehicle speed greater than 15 km/h
• Front-passenger mirror not selected for adjustment

Memory function

The parking position can be saved together with the seat adjustment and mirror glass positions.