Service Information: Seam Seal On Fender - Si97.10-P-0006A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 156, 166, 176, 177, 205, 213, 238, 247, 253, 292
In this Service Information we would like to notify you of the following with regard to the continuous improvement in our quality standards:
When replacing or repairing a fender at the left or right, as part of repair, and if not already available as standard, a seam seal (A) must be applied in the inner area of the fender. Width of seam seal (A) is approx. 30 mm, thickness of seam seal (A) is approx. 2-3 mm.
The corresponding seam seal (A) is available in XENTRY Parts Information under the category "Paints & operating fluids".