Tightening Procedure For Charge Air Distributor - AR09.41-P-8683-01MRH

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Engine 264

INTAKE MANIFOLD

Number	Designation		Engine 264
BA09.20-P-1001-01H	Screw/bolt, charge air distributor to cylinder head	Nm	14

Fig 1: Charge Air Distributor Tightening Sequence - Engine 264

Courtesy of MERCEDES-BENZ USA

Tighten screws/bolts (1 to 5) in ascending numerical sequence .