Remove/Install Oil Lines On Turbocharger - AR09.40-P-6020-13MR

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Engine 274

MODIFICATION NOTES

18.05.2016	Screw oil line oil inlet to exhaust gas turbocharger	BA09.40-P-1005-01U
18.05.2016	Screw oil line oil inlet to crankcase housing	BA09.40-P-1006-01U
18.05.2016	Screw oil pressure line on exhaust gas turbocharger	BA09.40-P-1007-01U
18.05.2016	Screw oil pressure line to crankcase housing	BA09.40-P-1008-01U

TURBOCHARGER

Number	Designation			Engine 274
BA09.40-P-1005-01U	Screw/bolt, oil line for oil feed to exhaust gas turbocharger	Stage 1	Nm	8
BA09.40-P-1005-01U		Stage 2	∠°	60

TURBOCHARGER

Number	Designation			Engine 274
BA09.40-P-1006-01U	Screw/bolt, oil line for oil feed to crankcase	Stage 1	Nm	8
BA09.40-P-1006-01U	Screw/bolt, oil line for oil feed to crankcase	Stage 2	∠°	60

TURBOCHARGER

Number	Designation			Engine 274
BA09.40-P-1007-01U	Bolt, oil return flow line to turbocharger	Stage 1	Nm	8
BA09.40-P-1007-01U	Bolt, oil return flow line to turbocharger	Stage 2	∠°	60

TURBOCHARGER

Number	Designation			Engine 274
BA09.40-P-1008-01U	Bolt, oil return line to crankcase	Stage 1	Nm	8
BA09.40-P-1008-01U	Bolt, oil return line to crankcase	Stage 2	∠°	60

Detach oil line (1) at crankcase (01) and ATL.
Installation: Replace screw/bolts.

Installation: Replace seals.
Detach oil return line (2) on crankcase (01) at ATL
Installation: Replace screw/bolts.

Installation: Ensure correct seating of the bracket (2H) on the crankcase (01) and the lower seal (2D).

Fig 1: Oil Lines On Turbocharger Components Location - Engine 274

Courtesy of MERCEDES-BENZ USA

Installation: Replace upper and lower seal (2D).