Open/Close Coupling - AR09.41-P-1311-01AL
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 139, 152, 156, 157, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 626, 629, 640, 642, 646, 651, 654, 656, 780
Shown on variant 1
Open clutch
- Slide nose (2) of catch spring (3) to position (B).
Never pull on the eyelet (1).
The catch spring (3) will lose its pretension otherwise.
- Detach hose from component part.
- Check sealing ring for damage.
If damage is present,
↓
Replace hose.
Close clutch
- Slide nose (2) of catch spring (3) to position (A).
- Slide hose onto component until the catch spring (3) latches.
Ensure connections are clean and free of grease.
- Check connection by pulling a little at the hose.
Shown on variant 2