220 589 02 31 00 Clamping Jaws - WS35.00-P-0175B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 124, 129, 140, 166, 170, 171, 172, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 253, 292
Use in FG 35/Set B
Purpose:
Clamping jaw Ø 34 mm for rear axle shaft, used for pressing on constant-velocity joint
MODIFICATION NOTES
| 23.2.98 | Replacement for 116 589 10 31 00 |