220 589 01 43 00 Removal And Installation Tool - WS35.00-P-0171B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 172, 204, 205, 207, 211, 212, 213, 215, 216, 218, 219, 220, 221, 222, 230, 231, 238, 253, 257, 290
Use in FG 35/Set B
Purpose:
Press out/in tool for elastomer bearings of the spring link on the rear axle carrier (in combination with hydraulic press 202 589 04 43 10)
| 220 589 01 43 12 Threaded spindle | FG35/Set B | WS35.00-P-0171-01B |