220 589 01 09 00 Socket Wrench Bit - WS35.00-P-0253B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 190, 197, 215, 216, 220, 221, 240

MODEL 205, 213, 238, 253

Use in FG 26/35/Set B

Purpose:

Socket SW 36 for collar nut on drive pinion gear flange.

Socket for collar nut on rear axle shaft to rear axle shaft flange with thread M 29.

NOTE: For rear axle differential with ring gear -Ø 240 mm.

Courtesy of MERCEDES-BENZ USA