203 589 01 14 00 Sleeve - WS35.00-P-0237C

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166, 167, 171, 172, 203, 204, 205, 207, 209, 211, 212, 213, 217, 218, 219, 221, 222, 230, 231, 253, 292

Use in FG 35/Set C

Purpose:

Sleeve for driving in side radial shaft sealing rings on rear axle housing with ring gear d=200.

NOTE: In combination with 140 589 10 15 00 drift.

Courtesy of MERCEDES-BENZ USA