202 589 04 43 00 Extraction Tool - WS35.00-P-0153C
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 124, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 218, 219, 220, 221, 222, 230, 231, 238, 242, 245.20/23, 246, 251, 253, 257, 292, 414
MODEL 223
with code Z07 (B7 armoring on special protection version)
Use in FG 35/33/Set C
Purpose:
Extraction tool for wheel hub on front axle and rear axle.
Plate for setting shims when pressing out elastomer bearing of strut rod in model 205, 213, 238, 253 and 257.
NOTE:
Do not exceed max. torque of 50 Nm on press spindle.
For FG 33:
Mode 168: In combination with W 168 589 00 43 00 Backplate.
Model 169, 242: In combination with W 202 589 04 43 06 Plate.
| 202 589 04 43 06 Plate | Model 124, 129, 163, 164, 168, 169, 170, 190, 201, 202, 203, 204, 208, 209, 210, 221, 242, 245.20/23, 246, 251, 414 FG 33/Set C |
WS33.00-P-0114-06C | |
| 202 589 04 43 07 Plate | Model 117, 124, 129, 163, 166, 170, 172, 176, 190, 201, 202, 203, 204, 205, 208, 209, 210, 213, 238, 242, 246, 253, 257 FG 33/35/Set C |
WS35.00-P-0153-01C | |
| 202 589 04 43 12 Bracket | Model 117, 124, 129, 140, 163, 166, 170, 190, 201, 202, 203, 208, 210, 215, 220, 242, 246 FG 35/Set C |
WS35.00-P-0153-02C | |
| 202 589 04 43 10 Press | Model 117, 124, 129, 140, 163, 166, 170, 172, 190, 201, 202, 203, 204, 207, 208, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 242, 246 FG 33/35/Set C |
WS35.00-P-0153-03C | |
| 202 589 04 43 11 Pressure screw | Model 117, 124, 129, 140, 163, 166, 170, 190, 201, 202, 203, 208, 209, 210, 211, 215, 219, 220, 230, 242, 246 FG 33/35/Set C |
WS35.00-P-0153-04C | |
| 202 589 04 43 03 Drift | Model 164, 166, 169, 190, 203, 204 FG 35/Set C | WS35.00-P-0153-05C |